C type fin press Line ZCPC 45 Learn more

+86-13390989750

song@smac.com.cn

+86-13390989750

C type fin press Line ZCPC 45 Learn more

description1

Zipper closure 1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying fabric for superior performance. REGULAR FIT - US standard sizes. An athletic fit that sits close to the body for a wide range of motion, designed for optimal performance and all day comfort. FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them in place during workout

Main characters & function:

Technical Specs:	ZCPC-45
Capacity	450KN
Nominal pressure stroke	1.6mm
Slide-strokes	40mm/ dia 9.52 fin die;
Stroke per minute	120~250spm;
Die height	Max 270mm
Die height adjustment	60mm
Table size	85070080mm
Bottom size of slide	530×340mm
Width of material	270mm / dia 9.52mm;
Stack length	Max 1000mm
Collecting height of material	600~800mm
Coil ID x Coil OD	Φ75mm/150mm×Φ850mm
Main motor	5.5KW
Weight	4800kgs
Overall size	6400X2000X2700mm

Part chose:

Air valve—TACO (Japan)
PLC --- OMRON Japan
Converter:TECO Taiwan or DELTA Taiwan
Pneumatic Solenoid valves: Airtec ( Taiwan)
Electric components: TE (France)or LG ( Korea)
Pneumatic cylinder: Allgreat or SMC (Japan)
Induction switch & sensors & inductor: Autonics (Korea)

FIN Die (1) : Conical collar base, Wave flat surface, Rippled fin edge

Drawingto be issued for your confirmation
SPECIFICATIONS:

(1) fins: Φ6.35mm*21*12.7*12R*2P

Tube diameter: Φ6.35

Fin hole: Φ9.83mm+/-0.03mm (ID)

Row Distance:21mm

Hole distance: 12.7mm

Collar height: 3~6 mm (according to fin drawings confirmed)

Fin thickness:0.15 to 0.20mm

FPI: 3 to 6

Fin Surface: plain flat surface

Fin edge: ripple fin edge

Numbers of rows: 12

Progress: 2P

With heating hole (no flaring)

Die consists of draws, pierce extrudes, reflare, Edge trim, pilot, slit, feed and cut-off station

Moulds Material:

	MATERIAL	HARDNESS	COUNDRY
DRAW PLATE	NAK80	HRC40-42	JAPAN
DRAW PUNCH AND DIE	SKD11	HRC60-62	JAPAN
REFLACE PUNCH AND DIE	SKD11	HRC60-62	JAPAN
LOUVER PUNCH AND DIE	SKD11	HRC55-60	JAPAN OR SWEDEN
PIERCE PUNCH AND DIE	SKD11	HRC55-60	JAPAN OR SWEDEN
SLITTER BLADE	SKD11	HRC55-60	JAPAN OR SWEDEN
EDGE TRIM BLADE	SKD11	HRC55-60	JAPAN OR SWEDEN
CUT OFF BLADE	SKD11	HRC55-60	JAPAN OR SWEDEN
LOUVER PUNCH AND DIE	SKD11	HRC55-60	JAPAN OR SWEDEN

Main Technical parameter

S.N	Item	Parameter	Remark
1	Capacity	450KN	C Type Press
2	Slide strokes	40mm	Or 50mm，60mm
3	Stroke per minute	120-200 S.P.M	Or 120-180、120-160
4	Die Height	210-270mm
5	Throat Depth	290mm
6	Bottom size of slide	400×300mm
7	Table Size	850×580mm	850×660mm
8	Collector Height	630mm
9	Collector Width	1200mm	Or 1500mm、2000mm
10	Coil Width	≤330mm
11	Coil Dia. ID x OD	Φ75mm×Φ850mm	Or Φ150mm×Φ850mm
12	Main Motor Power	7.5kw
13	Power supply	AC380V/3ph/50Hz	Can be tailor made
14	Fin Die Specification	Need to be confirmed by customer	Fin material, thickness, collar height
15	Die automatic lubricating device	Optional	Non-standard
16	Oil mist blowing waste device	Optional	Non-standard
17	Photo-electronic device	Optional	Non-standard
18	Die Fast Changing Device	Optional	Non-standard

Structure and overview

The entire production line consists of high-speed precision press, material discharge device, material oil lubrication device, material pulling device (single and double jump), fin stacker, waste collection device, electrical system, pneumatic system etc.

C type fin press Line ZCPC 45 Learn more

CONTACT US